Voltage Divider Calculator
Calculate the output voltage of a two-resistor voltage divider, or the missing resistor for a target output voltage. Enter the input voltage and two of R1, R2 and Vout, with prefixes such as 10k.
Frequently asked questions
What is the voltage divider formula?
Vout = Vin × R2 / (R1 + R2), where R1 connects to the input voltage and R2 to ground, and Vout is measured across R2.
How do I find a missing resistor?
Enter the input voltage, the target output voltage and one resistor. The tool solves for the other one.
Does the load change the output?
Yes. Whatever you connect to Vout is in parallel with R2 and lowers the output. Keep the load resistance at least ten times higher than R2, or use a voltage regulator.
How much current does the divider draw?
Vin / (R1 + R2), shown in the result together with the power the two resistors dissipate. Higher resistor values waste less power.
Can I use a divider to power a circuit?
Only for very small loads such as a microcontroller input. To power a circuit, use a regulator, because a divider's output changes with the load.
Which prefixes can I use?
k for kilo-ohms, M for mega-ohms and m for milli, for example 4.7k or 1M.